cheap replica jewelry

Historic Restoration & Preservation

Masonry Spackle

Ready-to-use, high quality sand texture silicate based filler and putty for all mineral surfaces, interior and exterior, to fill holes, small cracks, and other minor surface defects.

 
Soldalit ME
Soldalit ME
SOLDALIT® ME ALL-SURFACE & SELF CLEANING Mineral Silicate Finish
 
Design Pigmented Mineral Stain (Design Lasur)
Design Pigmented Mineral Stain (Design Lasur)
Pigmented Mineral Stain for interior or exterior use
 
Ecosil ME Self-Sanitizing Interior Mineral Silicate Paint
Ecosil ME Self-Sanitizing Interior Mineral Silicate Paint
KEIM Ecosil-ME is a high quality, self-sanitizing, multipurpose interior silicate paint
 
NHL Kalkputz Fine
NHL Kalkputz Fine
KEIM NHL-Kalkputz-Fine is a dry bagged mortar based on sand, lime (white lime, highly hydraulic natural lime) and hydraulic additives, as well as additives for a better processing and adherence.
 
NHL-Kalkputz-Grob
NHL-Kalkputz-Grob
KEIM NHL Kalkputz-Grob is a dry bagged mortar manufactured to DIN EN 998-1, based on sand, lime (white lime, highly hydraulic natural lime) and hydraulic additives, as well as additives for a better processing and adherence.
 
Porosan Top Coat (Trass-Sanierputz)
Porosan Top Coat (Trass-Sanierputz)
Dry bagged mortar based on trass, lime, frost-resistant sand, cement and additives for achieving specific properties. Restoration render mortar (R) to DIN EN 998-1. Strength corresponds to mortar category CS II or P II to DIN V 18550. Complies with WTA data sheet 2-9-04/D and has been WTA certified.
 
Restauro Pigmented Mineral Stain (Restauro-Lasur)
Restauro Pigmented Mineral Stain (Restauro-Lasur)
KEIM Restauro-Lasur is a silicate-based, thin layer coating especially for low pigmented coatings on masonry.
 
Restauro-Fuge
Restauro-Fuge
Joint replacement material, especially for natural stone masonry, but also for clinker or sand-lime bricks.  Mineral dry bagged joint mortar with hydraulic binders.
 
Restauro-Top
Restauro-Top
KEIM Restauro-Top is a natural stone/masonry replacement material for surface zones. Mineral dry bagged restoration mortar with hydraulic binders. 
 
Universalputz Fine Historic Mix Plaster/Stucco
Universalputz Fine Historic Mix Plaster/Stucco
Universalputz Fine is a thin layer, interior and exterior plaster and stucco based on a unique formula of hydraulic lime, white Portland Cement and mineral fibers/fillers.  Meets requirements of CSIII (P II acc. to DIN 18550). Serves as the base for KEIM Mineral Silicate paints and finishes, for a complete plaster/stucco system for historic restoration or new construction.  
 
Universalputz Standard Historic Mix Plaster/Stucco
Universalputz Standard Historic Mix Plaster/Stucco
Lime cement render-KEIM Universalputz is a renovation and thin layer exterior wall render, based on lime cement and fiber reinforcement, (Standard render to DIN EN 998-1). KEIM Universalputz corresponds to mortar category CS III, P II acc. to DIN V 18550. Combined with KEIM silicate coatings, KEIM Universalputz is a coordinated render/coating system.
 
Design Dilution/Thinner (Fixative)
Design Dilution/Thinner (Fixative)
Dilution for KEIM Design Lasur, and also used as pretreatment
 
Porosan Key Coat (Trass-Zementputz)
Porosan Key Coat (Trass-Zementputz)
Hydraulically binding dry bagged mortar based on cement, trass, frost resistant dolomite sand and additives. Standard render mortar acc. to DIN EN 998-1.
 
Porosan-Equalizer (Ausgleichsputz-NP)
Porosan-Equalizer (Ausgleichsputz-NP)
Dry bagged mortar based on trass, lime, frost-resistant sand, cement and additives for establishing the necessary properties.
 
Restauro-Base (Grund)
Restauro-Base (Grund)
For lining deep areas of damage (> 2 cm) and as a core material for open form casting.  Mineral dry bagged restoration mortar with hydraulic binders.
 
Restauro-Giess
Restauro-Giess
For reproducing ornamental figures and parts by casting in molds.  Mineral dry bagged restoration mortar with hydraulic binders.
 
Soldalit Coarse Texture Base Coat (Grob)
Soldalit Coarse Texture Base Coat (Grob)
Soldalit-Grob is a filled, Sol-Silicate primer/base coat for exterior base and intermediate coats, designed especially for previously latex/acrylic painted surfaces.  Designed to fill hairline cracks and acts as a block filler.  Use with Soldalit or other mineral silicate finish coats.  
 
Soldalit Dilution/Thinner
Soldalit Dilution/Thinner
KEIM Soldalit Dilution is a Sol-Silicate dilution and primer for the KEIM Soldalit System
 
Design Base/Extender Medium
Design Base/Extender Medium
Sol-silicate based, pigment-free additive for KEIM Design-Lasur.
 
Lotexan N
Lotexan N
Clear water repellancy for natural stone and masonry
 
Restauro Dilution/Thinner
Restauro Dilution/Thinner
Dilution or thinner for KEIM Restauro-Lasur use with the final coat
 
Spezial Dilution/Thinner (Fixativ)
Spezial Dilution/Thinner (Fixativ)
Spezial Dilution/Thinner is used as a thinner for KEIM mineral silicate paints and complies with VOB/C DIN 18 363, 2.4.1.
 
Color Palette- KEIM Exclusiv
Color Palette- KEIM Exclusiv
Color Palette- KEIM Exclusiv $26.00
 
Color Palette- KEIM Naturstein
Color Palette- KEIM Naturstein
Color Palette- KEIM Naturstein $12.00
 
Color Palette- KEIM Spektrum
Color Palette- KEIM Spektrum
Color Palette- KEIM Spektrum $4.00
 
Porosan Blocker (Dichtungsschlamme)
Porosan Blocker (Dichtungsschlamme)
KEIM Porosan-Dichtungsschlämme is a mineral coating grout based on cement, fine sand and sealants with a grain size of 0 – 0.7 mm.
 
Silex-OH 100
Silex-OH 100
Consolidator for mineral substrates.Colorless and solvent-free silicate-based consolidant (OH = without water-repellent).
 
Bio Cleaner for Masonry, Stone and Concrete
Bio Cleaner is a biodegradable, easy to use liquid that removes stains from mold, algae, mildew, lichens and air pollutants.
 
Soldalit ME Grob
Soldalit ME Grob
Primer and filler coat for the Soldalit-ME system
 
Contact Plus Grob/Block Filler
Contact Plus Grob/Block Filler
KEIM Contact-Plus-Grob is a highly filled, silicate based textured priming coat
 
Contact-Plus
Contact-Plus
KEIM Contact-Plus is a highly filled, silicate-based priming coat